SERVICE
Harmony Ball Return Manual – 400-254-022 36 Rev. Date 3/16
10.0 SERVICE
Periodically, check for any applicable Service Bulletins at www.qubicaamf.com. Click on the
Support tab, and then select the Tech Support Customer Portal window.
QUARTERLY
Observe the operation of the lift. Make any necessary adjustments.
Verify that the blower is operating properly.
Verify that the hood is secure.
Verify that the intrusion sensor is operating properly.
ANNUALLY
Inspect the lift’s upper and lower guide wear strips and the side liners for excessive wear.
Replace if necessary.
Inspect the upper and lower V-wheels for cracks and excessive wear. Replace if necessary.
Remove the guards and inspect the drive belt for any issues. Replace the belt if necessary.
Brush and vacuum the squirrel cage fan in the blower.
Test the hood switches individually. Replace if necessary.
For replacement part numbers, refer to the Drawings and Part Numbers section at the back of
this manual.