4 | Working with the unit
Original instructions for use 23 / 96
Vegetables, e.g., potatoes
1. Insert the core temperature probe into the thickest part of the meat, all the way to the handle.
Soups, sauces, and desserts
1. Place the core temperature probe into the pan so that the core temperature probe is completely immersed in
the liquid.
2. When stirring the liquid, make sure to keep the core temperature probe in the pan.
3. When closing the pan lid, make sure that the core temperature probe is fully immersed in the liquid.
Products of different sizes
1. Start by inserting the core temperature probe into the smallest piece.
2. Once that piece has reached the desired core temperature, remove the small pieces from the core temperature
probe, and take them out of the pan.
3. After that, insert the probe into a larger piece and use the Reinsert
option to continue the cooking path.
Core temperature probe not detected
a The display will show this symbol:
1. Place the core temperature probe as described in these instructions for use.
2. Confirm the correction.
>> The cooking path will be implemented correctly. If you do not confirm the correction, the cooking path will be
canceled and you will need to restart it. A few cooking paths, such as low-temperature cooking, will continue
running despite the error.
4.12 Using the hand shower
The hand shower has two spray modes: spray
(A) and jet (B).
To Next Page
Loading...
Need help?
General
