8 | iZoneControl
50 / 96 Original instructions for use
8 iZoneControl
With iZoneControl, you can divide the pan base into individual heating zones and use them at different
temperatures. Unused areas can even remain cold. All you have to do is specify the results you want and start
cooking paths for each zone. The heating zones will then be heated to the optimum temperatures for the results
you have specified.
Please note that this intelligent assistant is optional on 2-XS models.
NOTE
The temperature difference between zones should not exceed 130°C.
Ticket selection window
Pan division
zone
Heating area
Pan assignments
Edit presets
Actions
8.1 Tickets
8.1.1 Preset tickets
Preset tickets are available for each of the different cooking modes.
To Next Page
Loading...
Need help?
General
