Rational iVario User Manual

11 | Settings
68 / 96 Original instructions for use
5. Tap
in the icon bar to return to the overview screen.
6. If you want the sound to play continuously until the cooking system has been loaded or the action has been
confirmed, press this button:
Continuous playback ON
7. If you only want the sound to play for a certain length of time, press this button:
Continuous playback OFF
> The
Tone length section will be activated.
8. Set the length anywhere between 0 - 180 seconds.
9. To apply the setting, press this button in the icon bar:
>> You will be returned to the overview screen.
11.4.4 End of cooking time
This is where you select the sound or melody that the cooking system uses to signal the end of the cooking time.
There are 37 sound options to choose from.
1. Press this button:
End of cooking time
2. Press this button:
Sound
3. Press the sound you would like to use.
> The sound will be played.
4. To turn off sounds, press this button:OFF
5. Press
in the icon bar to return to the sound overview screen.
6. If you want the sound to play continuously until the cooking system has been loaded or the action has been
confirmed, press this button:
Continuous playback ON
7. If you only want the sound to play for a certain length of time, press this button:
Continuous playback OFF
> The
Tone length section will be activated.
8. Set the length anywhere between 0 - 180 seconds.
9. To apply the setting, press this button in the icon bar:
>> You will be returned to the overview screen.
11.4.5 Process canceled / error detected
This is where you select the sound or melody that the cooking system uses to indicate that an error has been
detected. There are 37 sound options to choose from.
1. Press this button:
Proc. interrupt / Error found
2. Press the sound you would like to use.
> The sound will be played.
3. To turn off sounds, press this button:OFF
4. Tap
in the icon bar to return to the overview screen.
5. If you want the sound to play continuously until the cooking system has been loaded or the action has been
confirmed, press this button:
Continuous playback ON
6. If you only want the sound to play for a certain length of time, press this button:
Continuous playback OFF
> The
Tone length section will be activated.
7. Set the length anywhere between 0 - 180 seconds.
8. To apply the setting, press this button in the icon bar:
>> You will be returned to the overview screen.

Rational iVario Specifications

General

Brand	Rational
Model	iVario
Category	Commercial Food Equipment
Language	English