11 | Settings
Original instructions for use 67 / 96
11.3 Light
1. Press this button:
2. Press this button: Light
11.3.1 Display brightness
Here, you can adjust the display brightness on a scale of 0-100%.
1. Press this button:
Display brightness
2. Select the desired value on the scale.
>> The display brightness is adjusted automatically.
11.4 Sound
1. Press this button:
2. Press this button: Sound
11.4.1 Master volume
Here, you can set the master volume of the unit on a scale of 0–100%.
1. Press this button:
Master volume
2. Select the desired value on the scale.
>> The master volume is adjusted immediately.
11.4.2 Loading / action requests
This is where you select the sound or melody that the cooking system uses to prompt you to take action or load
the cooking system. There are 37 sound options to choose from.
1. Press this button:
Loading/action request
2. Press this button:
Sound
3. Press the sound you would like to use.
> The sound will be played.
4. To turn off sounds, press this button:OFF
5. Tap in the icon bar to return to the overview screen.
6. If you want the sound to play continuously until the cooking system has been loaded or the action has been
confirmed, press this button:Continuous playback ON
7. If you only want the sound to play for a certain length of time, press this button:Continuous playback OFF
> The Tone length section will be activated.
8. Set the length anywhere between 0 - 180 seconds.
9. To apply the setting, press this button in the icon bar:
>> You will be returned to the overview screen.
11.4.3 Program step end
This is where you select the sound or melody that the cooking system uses to indicate that a program step has
been completed. There are 37 sound options to choose from.
1. Press this button:
Program step end
2. Press this button:
Sound
3. Press the sound you would like to use.
> The sound will be played.
4. To turn off sounds, press this button:OFF
To Next Page
Loading...
Need help?
General
