5 | Intelligent cooking - iCookingSuite
Original instructions for use 37 / 96
5.5.4 Options
When a cooking path finishes, you can continue it using one of the following options.
Options are displayed in the cockpit and next to the cooking parameters.
New batch
Use this option to load another batch into the unit and resume the same cooking path with the defined cooking
parameters.
Continue with time
Use this option to continue the cooking path for a specific amount of time. If you select the option at the end of
the cooking path, a window appears where you can set the duration with which the cooking path is to be
continued.
1. Select the desired time.
>> The amount you set will be applied automatically within a few seconds.
If you switch from the cockpit back to the cooking parameters, the overview is grayed out. The cooking
parameters can not be changed. Once the set time has elapsed, you can either unload the unit or continue the
cooking path with an option.
Move
Select this option if you are cooking foods of different sizes or different foods with different cooking levels using
the core probe:
1. When the set core temperature has been reached, open the pan lid.
2. Reinsert the core temperature probe into a large piece, or into a piece with a higher target core temperature.
3. Remove the smaller or lower-temperature pieces of food from the pan.
4. Close the pan lid.
5. Press this button:
> A window appears, where you can set the core temperature.
6. Select the desired core temperature.
>> The amount you set will be applied automatically within a few seconds.
Repeat this step until all the food has reached the desired core temperature.
Hold
Use this option to hold the specified temperature. Choosing this option will hold the food at the preset
temperature or core temperature in order to keep it from overcooking. We recommend only holding food for brief
periods, in order to minimize cooking losses. In some cooking paths, such as overnight cooking, Holding is the
final step of the process, and will be started automatically once your desired results have been obtained.
1. To adjust the parameters of the option Hold, press the button:
2. Adjust the parameters as desired.
>> Once the cooking path is ended, the cooking step Hold is started automatically.
Bring to boil
This option allows you to bring a cooking liquid, a soup, or a sauce to a boil.
To Next Page
Loading...
Need help?
General
