Raymarine G-Series User Manual

DescriptionPartNoNotes
SeaTalk
ng
5m(16.4ft)
backbone
A06036
SeaTalk
ng
20m(65.6ft)
backbone
A06037
SeaTalk
ng
-bareends1
m(3.3ft)spur
A06043
SeaTalk
ng
-bareends3
m(9.8ft)spur
A06044
SeaTalk
ng
—SeaTalk2
0.4m(1.3ft)spur
A06048
SeaTalk
ng
Powercable
A06049
SeaTalk
ng
Terminator
A06031
SeaTalk
ng
T-Piece
A06028Provides1xspur
connection
SeaTalk
ng
5–way
connector
A06064Provides3xspur
connections
SeaTalk
ng
Blankingplug
A06032
11.3SeaTalk
hs
accessories
Radarpoweranddatadigitalcables
Thesecablescontainthewiresforascanner’spoweranddata
connections.
CablePartnumber
5m(16.4ft)Poweranddatadigital
cable
A55076D
10m(32.8ft)Poweranddatadigital
cable
A55077D
15m(49.2ft)Poweranddatadigital
cable
A55078D
25m(82.0ft)Poweranddatadigital
cable
A55079D
Note:Themaximumlengthfortheradarpoweranddatadigital
cable(includinganyextensions)is25m(82ft).
Radarpoweranddatadigitalextensioncables
Thesecablesextendthepoweranddatadigitalcablesfora
scanner’spoweranddataconnections.
CablePartnumber
2.5m(8.2ft)Poweranddatadigital
cable
A92141D
5m(16.4ft)Poweranddatadigital
cable
A55080D
10m(32.8ft)Poweranddatadigital
cable
A55081D
Optionsandaccessories
161

Raymarine G-Series Specifications

General

Brand	Raymarine
Model	G-Series
Category	GPS
Language	English

Summary

Important Information for G-Series Systems

Safety Warnings

Crucial safety advice for installation and operation to prevent injury and damage.

Usage Cautions

Guidelines for handling chart cards, cleaning the display, and using sun covers.

Chart Cards and EMC Guidelines

Information on compatible chart cards, proper usage, and Electromagnetic Compatibility (EMC) installation.

Technical Accuracy and Compliance

Details on IMO/SOLAS regulations, technical accuracy disclaimers, and warranty registration.

Planning the G-Series Installation

Handbook and Checklist Information

Overview of available G-Series handbooks and the installation checklist for system setup.

Nav Stations and System Overview

Understanding Nav Station configurations and the overall system architecture with diagrams.

System Integration and Networking

Connecting external devices and understanding networking constraints and protocols.

Cables and Connections Guide

General Cabling and Grounding Guidance

Best practices for cable routing, strain relief, isolation, and proper grounding.

Power Distribution and Protection

Guidance on typical power distribution, circuit protection, fuses, and breakers.

Network Connection Protocols

Details on connecting via SeaTalkhs, SeaTalkng, and NMEA protocols.

Location and Mounting Procedures

GPM Processor Unit Location Requirements

Requirements for processor unit placement, ventilation, and avoiding ignition sources.

Component Mounting Guidelines

Instructions for mounting G-Series monitors and keyboards.

Wireless Keyboard Setup

Installation and location requirements for the wireless base station and charging point.

Initial Power On Test

Before Powering Up Checks

Essential checks to ensure correct installation before system power-up.

Power Up Test and Verification

Procedures for initial power-up, sequence, and verifying component operation.

Initial System Setup

Keyboard Layouts and Configuration

Understanding keyboard controls and the first-time setup process.

Nav Station and Component Assignment

Steps for setting up Nav Stations and assigning monitors and keyboards.

System Checks and Verification

Basic System Setup Checks

Configuration for language, compass, and GPS setup.

Device Operation Checks

Verifying the correct operation of GPS, Radar, Sonar, and other integrated systems.

Video and Data Checks

Procedures for setting up and checking thermal camera, video sources, and data flow.

Troubleshooting Common G-Series Issues

Power, Monitor, and Keyboard Issues

Troubleshooting steps for common problems with power, monitors, and keyboards.

Radar, GPS, and Sonar Troubleshooting

Diagnosing and resolving issues related to radar, GPS, and sonar systems.

LED Status Indications

Understanding LED indicators on SeaTalkhs switch, GPM processor, and GVM module.

Technical Support and Specifications

Raymarine Customer Support

Contact details and resources for obtaining technical assistance from Raymarine.

Third-Party Support Information

Information on support contacts for third-party components like Navionics.

Processor and Module Specifications

Technical details for GPM processor and GVM400 video module.

Keyboard and Monitor Specifications

Technical specifications for various G-Series keyboards and monitors.

Options and Accessories

Network Cables and Hardware

Details on SeaTalk, SeaTalkng, and SeaTalkhs cables and network components.

Interface Cables and Spare Parts

Information on monitor, NMEA, audio/video cables, and available spare parts.