Renesas M32R/ECU Series User Manual

4
4-20
EIT
32180 Group User’s Manual (Rev.1.0)
4.12 Example of EIT Processing
4.12 Example of EIT Processing
(1) When RIE, AE, FPE, SBI, EI or TRAP occurs singly
Figure 4.12.1 Processing of Events When RIE, AE, FPE, SBI, EI or TRAP Occurs Singly
(2) When RIE, AE, FPE or TRAP and EI occur simultaneously
Figure 4.12.2 Processing of Events When RIE, AE, FPE or TRAP and EI Occur Simultaneously
RTE instruction
IE = 0
RIE, AE, FPE or TRAP is accepted first.
BPC register = Return address A
IE = 1
RIE, AE, FPE or TRAP and EI
occur simultaneously
Return address A:
IE = 1
IE = 0
IE = 1
RTE instruction
: EIT handler
EI is accepted next.
BPC register = Return address A
RTE instruction
IE = 0
IE = 1
BPC register = Return address A
IE = 1
RIE, AE, FPE, SBI, EI or TRAP
occurs singly
Return address A:
If IE = 0, no events but reset and
SBI are accepted.
: EIT handler

Renesas M32R/ECU Series Specifications

General

Brand	Renesas
Model	M32R/ECU Series
Category	Computer Hardware
Language	English