Renesas TPS-1 User Manual

TPS-1 User’s Manual: Hardware Appendix. A Setting of operating modes
R19UH0081ED0107 Rev. 1.07 page 64 of 86
Jul 30, 2018
Local I/O-Configuration
These settings control the 48 GPIOs and the SPI master interface. GPIOs can be set individually or in groups.
Single or groups of GPIOs can be configured to work as inputs or outputs. On the tab “Channel” you can configure some GPIOs for diagnostic
functions (PROFINET ChannelDiagList).
IO Parallel
At first you have to configure the basic addressing (e.g. API, SlotNo, et cetera).
Figure A-4: IO Parallel interface configuration part 1 (General Settings)
You can configure here the number of diagnosis channels and the start GPIO (see box Diagnosis).

Renesas TPS-1 Specifications

General

Brand	Renesas
Model	TPS-1
Category	Controller
Language	English