TPS-1 User’s Manual: Hardware Appendix. A Setting of operating modes
R19UH0081ED0107 Rev. 1.07 page 71 of 86
Jul 30, 2018
I&M0 Configuration (I&M0 data)
The provision of these parameter values is mandatory for every PROFINET device (I&M0 profile).
Table A-1: I&M0 Parameter
Parameter Description
VENDOR ID The parameter VENDOR_ID carries the ID of the respective device manufacturer. It
is assigned by PI.
This parameter contains the complete order number or at least a relevant part that
allows unambiguous identification of the device/module within the manufacturer's
web site.
SERIAL_NUMBER A serial number is a unique production number of the device manufacturer even for
devices with the same hardware, software or firmware edition.
The content of this parameter characterizes the edition of the hardware only.
Software-Revision The content of this parameter characterizes the edition of the software or firmware of
a device or module.
A changed value of the REVISION_COUNTER parameter of a given module marks
a change of hardware or of its parameters.
PROFILE_ID A module providing a special application profile may contain extended information
(PROFILE_SPECIFIC_TYPE) about its function and/or sub devices, e.g. HART.
In case a module provides a special application profile this parameter contains
information about the usage of its channels and/or sub devices.
IM_VERSION This parameter indicates the implemented version of the I&M functions.
This parameter indicates the availability of I&M records.
All parameters must be edited separately or can be copied as default values from the firmware. If you need more information regarding I&M0
parameters, please refer to the PROFINET specification.
To Next Page
Loading...
Need help?
General