17
1. Getting Started
This section describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
1. Auto Document Feeder (ADF)
Load a stack of originals here. They will
be fed automatically one by one.
The front and back side of two-sided
originals are scanned simultaneously.
2. Exposure glass
Place originals face down here.
3. Control panel
See “Control Panel”.
4. Front cover
Open to access the inside of the machine.
5. Copy tray (optional)
Copied or printed paper is delivered here.
6. Main power switch
If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on.
7. Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
8. Paper tray (tray 1-3)
Load paper here.
ANP074S
To Next Page
Loading...
Need help?
General
