Using the Document Server
175
4
Changing the number of print copies while printing is in progress
The following describes the procedure for changing the number of print copies
after printing is started.
Important
❒ This feature is enabled when the sort function is selected in the printing con-
ditions.
A Press the {Clear/Stop} key.
B Press [Change Quantity].
C Enter the number of print copies anew using the number keys.
D Press the {q} key.
E Press [Continue].
Printing will be resumed.
Note
❒ The range of print copies enterable in step
C
depends on the timing of your
pressing the {Clear/Stop} key.
Sample Print
When print copies are massive, you can print a single copy in advance to check
appropriateness of the printing order of the selected documents and the printing
conditions.
Important
❒ This feature is enabled when the sort function is selected in the printing con-
ditions.
A Select the document to be printed.
When a password is set, enter it and then press [OK].
B Press the {Sample Copy} key.
Only one copy will be printed.
To Next Page
Loading...
Need help?
General
