Copying
46
2
Selecting Copy Paper
There are two ways to select copy paper:
❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio.
❖ Manual Paper Select
Choose the tray containing the paper you wish to copy onto: a paper tray, by-
pass tray or Large Capacity Tray (LCT).
The following table shows original sizes and orientations that can be used with
Auto Paper Select (when copying at a ratio of 100%).
❖ Metric version
❖ Inch version
Note
❒ Only the paper trays set to [No Display] or [Recycled Paper] in Paper Type and
also set to [Yes] in Apply Auto Paper Select in Tray Paper Settings can be se-
lected in Auto Paper Select mode.
Reference
p.10 “Originals not recommended for the Auto Document Feeder (ADF)”
“Tray Paper Settings”, General Settings Guide
Original location Original size and orientation
Exposure glass
A3L, B4 JISL, A4KL, B5 JISKL, A5K, 8
1
/
2
" × 13"L
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISKL,
8
1
/
2
" × 13"L, 8KL, 16KKL
Original location Original size and orientation
Exposure glass
11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL, 8
1
/
2
" × 5"
1
/
2
K
ADF
A3L, A4KL, 11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL,
5
1
/
2
" × 8
1
/
2
"KL, 10" × 14"L, 7
1
/
4
" × 10
1
/
2
"L
To Next Page
Loading...
Need help?
General
