Supplementary Information
185
5
Supplementary Information
The following describes the detailed specifications of the respective functions.
❖ Batch mode
You cannot switch between 1-sided and 2-sided originals during copying.
❖ Mixed Sizes mode
• Since small originals may not be correctly aligned with the original guide,
the copy image may be slanted.
• You can place originals of two different sizes at a time.
• Copying speed and scanning speed will be reduced.
• When using with 1 Sided→2 Sided mode, always ensure that the originals
of each size are in even numbers. If you have an odd number of originals,
insert blank sheets to adjust the total.
❖ Bypass Tray Copy
• The following paper sizes can be selected as the standard sizes:
A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISL, A6L, 8
1
/
2
" × 13"L,
8
1
/
4
" × 13"L, 8" × 13"L, 8
1
/
4
" × 14"L, 8" × 10
1
/
2
"KL, 8" × 10"KL,
7
1
/
4
" × 10
1
/
2
"KL, 11" × 15"L, 11" × 14"L, 10" × 15"L, 10" × 14"L,
11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL, 5
1
/
2
" × 8
1
/
2
"KL
• When the beeper is turned off, it will not sound if you insert paper into the
bypass tray. See “System Settings on Main and Sub-machines”, General
Settings Guide.
• The number of sheets you can set in the bypass tray depends on the paper
type. If the number set exceeds that in the table below, paper misfeeds may
occur or copies may be skewed.
Paper type Number of sheets
Thick paper (105-157 g/m
2
, 28-42 lb.)
30 sheets
Thick paper (157-216 g/m
2
, 42-57.8 lb.)
20 sheets
Translucent paper 50 sheets
OHP transparencies 50 sheets
ADH027S
To Next Page
Loading...
Need help?
General
