Copier Functions
103
2
A Press [Edit / Stamp].
B Press [Stamp].
C Press [Background Numbering].
D Enter the number to start counting from with the number keys, and then
press the {q} key.
E Press [OK] twice.
F Place the originals, and then press the {Start} key.
Note
❒ To change the value entered in step
D
, press the [Clear] or the {Clear/Stop}
key to set a new value.
Reference
“Stamp”, General Settings Guide
Preset Stamp
Messages are stamped on copies.
Important
❒ You cannot use the bypass tray with this function.
❒ Only one message can be stamped at a time.
GCSTMP1E
To Next Page
Loading...
Need help?
General
