Using Connect Copy
147
3
Using Connect Copy
You can select Connect Copy from either machine by pressing [Connect Copy].
The machine on which you pressed [Connect Copy] and made Connect Copy set-
tings becomes the main machine, and the other the sub-machine.
Important
❒ When user authentication is set, use the number keys to enter a user code (up
to 8 digits) that is registered on the main machine, and then press the {q}
key. See “Administrator Tools”, General Settings Guide.
❒ When Basic Authentication, Windows Authentication, LDAP Authentica-
tion, or Integration Server Authentication is set, enter a login user name and
password. For the login user name and password, consult your Administra-
tor. See “When the Authentication Screen is Displayed”, About this Machine.
❒ In Connect Copy mode, use the main machine to perform this function. See
“General Features”, General Settings Guide.
A Make sure “Ready” is shown on the display.
To Next Page
Loading...
Need help?
General
