Service Program Mode
D062/D063/D065/D066 5-4 SM
with a right pointing triangle.
(7): Group.
Press to scroll the display to the previous or next group.
(8): Page.
Press to scroll to the previous or next display in segments the size of the screen display
(page).
(9): Line.
Press to scroll the display to the previous or next line, line by line.
(10): Prev Page or Next Page.
Press to move the highlight on the left to the previous or next selection in the list.
5.1.6 SP MODE PRINT (SMC PRINT)
You can print an SMC Report to check the machine's condition. The SMC Report gives a
list of the SP commands and their settings.
SP Print Mode (SMC Print)
5990
In the SP mode, push "Copy Window" to move to the copy screen, select the paper
size, then push Start. Select A4/LT (Sideways) or larger to make sure that all the
information is printed. Push "SP Window" to go back to the SP mode, select the
necessary SP Print Mode, and push Execute.
001 All (Data List)
002 SP (Mode Data List)
003 User Program Data
004 Logging Data
005 Self-Diagnostic Report
006 Non-Default (Prints only SPs that are set to values other than defaults.)
007 NIB Summary (Configuration, Systemlog, Nvramlog)
008 Capture Log
021 Copier User Program (Copy Management Report)
022 Scanner SP
023 Scanner User Program (Scanner Management Report)
To Next Page
Loading...
Need help?
General