Main Machine
SM 2-19 D062/D063/D065/D066
Installation
3. Install two supports [D] at the front side of the machine.
4. Check the machine operation. With the customer, determine the best place to attach
the cleaning reminder decal.
Date/Time Setting
Use the User Tools menu to set the current date and time.
On the operation panel, press the User Tools key.
On the touch-panel, press “System Settings”.
Press the “Timer Setting” tab.
Press “Set Date” to enter the date.
Press “Set Time” to enter the time.
SP Codes
SP5812-001
Service Telephone
Number Settings
Enter the contact number of the customer engineer.
This is the number displayed when a service call is
issued.
SP5841-001
Supply Name
Setting – Toner
Name Setting:
Black
This name appears when the user presses the Inquiry
on the User Tools screen.
SP5853
Stamp Data
Download
Do SP 5853 to copy stamp data to the hard disk, then
turn the power off/on.
Connecting the Drum Heater Connector and the Tray Heater
Connector.
1. Open the rear upper cover and the rear lower cover.
To Next Page
Loading...
Need help?
General