Color Background
Copies by adding a color in the whole page.
• Since the Color Background function overprints the entire original, the color of the image may change.
1. Select a color mode.
2. Press [Edit / Color].
3. Press [Color], and then press [Color Background].
4. Select the background color, and then press [OK] twice.
You can adjust the density of the color in four steps.
To select user color, press [User Color], and then select the color.
5. Place the originals, and then press the [Start] key.
• To cancel the selection, press the selected (highlighted) key.
• When the Full Color is selected, the full color counter will advance by “1”. When the Black & White
is selected, the mono-color counter will advance by “1”.
• When copied using the registered color, the original will be copied lighter than the registered color.
Color Functions
111
To Next Page
Loading...
Need help?
General