Edit
This section describes the user tools in the Edit menu under Copier / Document Server Features.
Enter the width of the binding margin with the number keys as follows:
• 0 1.2 inches (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• 0.1 3.9 inches (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06 inch) will not be displayed as the width of the separation line,
when specifying solid or broken lines.
Front Margin: Left / Right
Specify left and right margins on the front side of copies in Margin Adjustment mode.
Default: [Left: 0.2 inch]
Back Margin: Left / Right
Specify left and right margins on the back side of copies in Margin Adjustment mode.
Default: [Right: 0.2 inch]
Front Margin: Top / Bottom
Specify top and bottom margins on the front side of copies in Margin Adjustment mode.
Default: [T / B: 0.0 inch]
Back Margin: Top / Bottom
Specify top and bottom margins on the back side of copies in Margin Adjustment mode.
Default: [T / B: 0.0 inch]
1 Sided 2 Sided Auto Margin: TtoT
In 1 sided 2 sided Duplex mode, you can specify the margins on the back side.
The margin is set to the same value of “Back Margin: Left/Right”.
Default: [Right: 0.2 inch]
1 Sided 2 Sided Auto Margin: TtoB
In 1 sided 2 sided Duplex mode, you can specify the margins on the back side.
The value set for “Back Margin: Top/Bottom” is used.
Default: [T / B: 0.0 inch]
Erase Border Width
Specify the width for erasing border.
Default: [0.4 inch]
Edit
225
To Next Page
Loading...
Need help?
General