6. Copier and Document Server
Features
This chapter describes user tools in the Copier / Document Server Features menu.
Accessing User Tools
This section describes how to access User Tools menu.
User Tools allow you to change or set defaults.
• Operations for system settings differ from normal operations. Always quit User Tools when you have
finished. For details about how to end User Tools, see “Quitting User Tools”.
• Any changes you make with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Energy Saver] or [Clear Modes] key is pressed.
• p.218 "Quitting User Tools"
Changing Default Settings
This section describes how to change the settings of User Tools.
• If the Administrator Authentications Management is specified, contact your administrator.
1. Press the [User Tools/Counter] key.
2. Press [Copier / Document Server Features].
3. Select the user tool you want to change.
4. Change settings by following instructions on the display, and then press [OK].
217
To Next Page
Loading...
Need help?
General