1.Installation
4
1. Installation
Installation Requirements
Environment
1. Temperature Range:
10 °C to 40 °C (50 °F to 104 °F)
2. Humidity Range:
10% to 85% Relative Humidity (non-condensing)
3. Ambient Illumination:
Less than 1500 lux (do not expose to direct sunlight or strong light)
4. Ambient Dust:
Less than 0.10 mg/m
3
5. If the place of installation is air-conditioned or heated, do not place the machine where it will be:
1) Subjected to sudden temperature changes
2) Directly exposed to cool air from an air-conditioner
3) Directly exposed to heat from a heater
6. Do not place the machine where it will be exposed to corrosive gases.
7. Do not install the machine at any location over 3,048 m (10,000 feet) above sea level.
8. Place the controller on a strong and level base.
9. Do not place the machine where it may be subjected to strong vibrations.
10. Do not connect the machine to a power source shared with another electrical appliance.
11. The machine can generate an electromagnetic field, which could interfere with radio or television
reception.
Machine Level
1. Front to back: Within 5 (0.2") away from level
2. Right to left: Within 5 (0.2") away from level
To Next Page
Loading...
Need help?
General
