2.General Operations For Servicing
60
Adjusting the System Date and Time
The system date and time should be adjusted by the field technician in the following cases, before
leaving the customer site. Also, confirm that the E-25C is set to the correct time zone.
At installation
After replacing the motherboard
After replacing the lithium battery on the motherboard
1. Access to Configure. [Link to Accessing Configure]
2. Select Fiery Server > Regional Settings.
3. Confirm correct Time Zone, Date and Time. If not, adjust the settings and click Save.
4. Click Reboot on the bar at the top for the changes to take effect.
To Next Page
Loading...
Need help?
General
