4.System Maintenance
86
Clearing the Queued Print Jobs in the E-25C
The "Clear Server" command allows you to clear all jobs in all server queues, as well as all jobs
archived on the E-25C HDD, the index of archived jobs (in the Archive window), all FreeForm masters,
and the index of FreeForm masters (in the FreeForm window).
Consult with your administrator or operator before choosing Clear Server.
Before using Clear Server, inform the site administrator that jobs data on the E-25C HDD will
be deleted.
1. Make sure the E-25C is not in use.
2. Press the Home button on the operation panel of the copier and then touch the Fiery icon to
access the Fiery menu screen. [Link to Running the E-25C Setup]
3. Move to the Login tab.
4. You are asked to enter an administrator password. (The default password is “Fiery.1”.)
5. Move to Fiery tab.
6. Touch “Clear Server”. Then touch “Clear Server” again.
7. When you are prompted “Clear all jobs from all queues?”, touch “OK”
8. The Fiery menu screen will disappear and data will be cleared before the system restarts.
9. Press the Home button on the operation panel of the copier and then touch the Fiery icon. Check if
the E-25C becomes idle.
The customer can clear the jobs in the E-25C with the "Clear Server" menu from the
To Next Page
Loading...
Need help?
General
