4.System Maintenance
125
From Command WorkStation, go to Server > Device Center > GENERAL > Tools > "Backup &
Restore".
The following is the procedure when starting from Configure.
Creating Backup Files
1. Print a configuration sheet and confirm the date, time, and time zone are correct.
If not, correct the date and time. [Link to Adjusting the System Date and Time]
2. Go to Configure. [Link to Accessing Configure]
3. Choose Fiery Server.
4. Click Backup.
5. Select the items to backup.
6. Specify the backup filename.
It is recommended to select the "Add date to filename" option.
7. Click Backup.
Make sure that two files (*.fbf and *.DAT) are generated. Both files are required to restore
the Fiery.
8. Backup will start. When completed, the following screen appears.
Do not close this window or press OK before you download the two files.
To Next Page
Loading...
Need help?
General
