To Next Page

To Previous Page

1.Installation

 Fiery Graphic Arts Basic Plus Package

 Productivity Package

 Spot-On

 Auto Trapping

 Hot Folders & Virtual Printers

Client Options:

The license file is stored in the HDD of the Client PC.

 Fiery Impose

 Fiery Compose

Preparation: Requirements for Activation

 LAC (License Activation Code)

A unique code of 25 digits that is printed on a sheet when open the optional feature box/envelope.

 An installed E-25C.

 A PC with a web browser installed.

 When using Internet Explorer, version 11 or later.

 Command WorkStation (Must be installed for Client Options)

 Internet Access Environment

 If the customer has already a USB dongle for a Client Option (purchased for previous models,

etc.), it can be used with E-25C

Important Notes for Activation

1. If you have multiple Fiery options to activate, you must activate them one at a time. It is not

possible to activate several options at once.

2. If the keychip (Server Options) or PC (Client Options) becomes defective, the following's are

needed as evidence in order to get recovered.

 Defective key chip

 LAC

 Option Name

 Serial Number of E-25C

 OS on the client PC where the software was installed.

 The configuration page that shows that the defective key chip had the optional feature license

installed.

Therefore, please be sure that you always print a configuration page and note the above

information and keep them together when you activate a new optional feature on the E-25C.

Automatic Activation and Manual Activation

There are two ways to activate the optional features: "Automatic" and "Manual".

Ricoh E-25C User Manual

Other manuals for Ricoh E-25C