Registering SMTP and LDAP Authentication
This section describes how to register SMTP and LDAP Authentication.
SMTP Authentication
This section describes how to register SMTP Authentication.
For each user registered in the Address Book, you can register a login user name and login password to
be used when accessing an SMTP server.
To use an SMTP server, you need to program it beforehand.
• When [Do not Specify] is selected for SMTP Authentication the User Name and Password that you
have specified in SMTP Authentication of File Transfer settings applies. For details, see "File Transfer".
1. Press the [User Tools/Counter] key.
2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Select [Address Book Management] using [ ] or [ ], and then press the [OK] key.
5. Select [Program/Change] using [ ] or [ ], and then press the [OK] key.
Registering SMTP and LDAP Authentication
341
To Next Page
Loading...
Need help?
General
