Installing the Operating Instructions
The CD-ROM "Manuals" provided with this printer contains HTML version Operating Instructions. Follow
the instructions below to install it.
• System Requirements:
• Windows 95/98/Me, Windows 2000/XP/Vista, Windows Server 2003/2003 R2, or
Windows NT 4.0
• 800 × 600 or higher monitor resolution
• Web Browsers:
• Microsoft Internet Explorer 4.01 SP2 or later
• Netscape 6.2 or later
• Non-recommended browsers can display the simplified manual only.
• HTML manuals can also be viewed on a Macintosh.
1. Quit all applications currently running.
2. Insert the CD-ROM “Manuals” into the CD-ROM drive.
The installer starts.
Auto Run may not work under certain operating system settings. In this case, launch "Setup.exe" in
the CD-ROM root directory.
3. Select an interface language, and click [OK].
4. Click [Install manuals].
If you want to read manuals from the CD-ROM, click [Read HTML manuals] or [Read PDF manuals].
5. Follow the instructions on the screen to complete the installation.
6. Click [Finish] when the installation is complete.
7. Click [Exit].
• If you cannot install a manual, copy the "MANUAL_HTML" folder to your computer's hard drive, and
then run "Setup.exe".
• To delete an installed manual, on the [Start] menu, click All Programs, then [Product Name], and then
uninstall the data.
• If you are installing the manuals on a Macintosh, open the "Manuals.htm" file on the CD-ROM.
11
To Next Page
Loading...
Need help?
General
