Make sure paper is not stacked higher than the
upper limit mark ( ) inside the tray. When using the
bypass tray, make sure paper is not stacked higher
than the paper guides inside it.
Duplex printing Supported
Middle Thick
Paper thickness 82 to 105g/m
2
(21 to 28lb.)
Printer setup
Select [Paper Input] [Paper Type: (tray name)]
[Middle Thick].
Printer driver setup Select [Middle Thick] in [Paper Type].
Supported paper feeding tray Any input tray can be used.
Paper capacity
• Tray 1, 2: 550
• Tray 3: 550 (1000-sheet paper feed unit) or
2000 (2000-sheet paper feed unit)
• Tray 4: 550
• LCT: 1200
• Bypass tray: 100
Make sure paper is not stacked higher than the
upper limit mark ( ) inside the tray. When using the
bypass tray, make sure paper is not stacked higher
than the paper guides inside it.
Duplex printing Supported
Thick paper
Paper thickness
106 to 216 g/m
2
(28 to 58 lb.)
• [Thick Paper 1]: 106 to 160 g/m
2
(28 to 45
lb.)
• [Thick Paper 2]: 161 to 216 g/m
2
(45 to 57
lb.)
• [Thick Paper 3]: 161 to 216 g/m
2
(45 to 57
lb.)
Paper Recommendations
81
To Next Page
Loading...
Need help?
General
