Ricoh MLP150DN Operaing Instructions

Configuring Network Settings When Using NetWare
If you use NetWare, select the appropriate NetWare frame type.
Select one of the items below as necessary.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
• Usually, you can use the default (Auto Select). When you first select [Auto Select,] the frame type
detected by the printer is adopted. However, if your network can use more than two frame types, the
printer may fail to select the correct frame type with [Auto Select] selected. In this case, select the
preferred frame type.
1. Press the [Menu] key.
BEK204S
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Network], and then press the [OK] key.
4. Configuration
60
4

Ricoh MLP150DN Specifications

General

Brand	Ricoh
Model	MLP150DN
Category	Printer
Language	English