Setting Security Method of Wireless LAN
Setting a WEP Key
If the wireless network uses WEP to encrypt transmitted data, the corresponding WEP key must be set to
the printer to allow communications with other network devices.
Ask the network administrator for the WEP key to use.
1. In the [Wireless LAN] menu, press the [ ] or [ ] key to select [Security Method], and then
press the [OK] key.
2. Press the [ ] or [ ] key to select [WEP], and then press [Details].
When activating the WEP setting, you will need to enter the WEP key. If you have not entered the key,
be sure to enter it.
3. A confirmation message appears. Press [Enter].
4. Press the [ ] or [ ] key to enter characters, and then press [Accept].
• When entering a character, pressing [Accept] will mask it with an asterisk for security reasons.
4. Configuration
68
To Next Page
Loading...
Need help?
General
