Ricoh P C301W Field Service Manual

5.System Maintenance
182
Firmware Updating
• Do not turn off the main power of the machine during the firmware updating. If doing so, the
engine board or controller board may be damaged.
• Never disconnect the cable you are using for the updates during the update process.
• When the controller firmware is updated, the fax firmware is also updated at the same time.
Fax firmware cannot be updated separately. The fax firmware is not listed in the configuration
page, and so check it by selecting SP mode > Information Display > FW Version > FAX FW".
Before Updating the Firmware
Compatible Operating Systems
• Windows 7/8.1/10
• Windows Server 2008/Server 2008 R2/Server 2012/Server 2012 R2/Server 2016
• OS X 10.10 or later
Backing Up the Machine's Settings
After the firmware update, the machine's settings may return to their factory defaults.
We recommend that you back up the machine's settings by accessing the machine using Web Image
Monitor from a computer connected via a network.
Also, you can print out lists and report (ex. Scanner Dest List, Quick Dial Dest, Special Sender List, and
Configuration Page) using Web Image Monitor or the machine's operation panel. (Print List/Report)
Connection
Connect your computer and the machine through a network or directly by USB.
• Make sure your computer is securely connected to the machine with the USB or network cable
that you will be using for the firmware update.
• We recommend that you update the firmware via USB. If you update the firmware over the
network, the machine may receive data over the network such as a print job during the
updates, which can interfere with the update process.
• If you are updating the firmware via USB, the printer driver for USB connection must be
installed on your computer beforehand. However, if you are updating via a network, no printer
driver is necessary.
• Disconnect any other cables that are not necessary for the firmware update, such as a
telephone cable, from the machine.
• Make sure that your computer does not enter standby or hibernation mode during the update
process.

Ricoh P C301W Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (black, normal)	9.4 s
Time to first page (color, normal)	9.8 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	256 MB
Built-in processor	-
Sound pressure level (printing)	- dB
Cables included	AC
Included cartridge capacity (black)	1000 pages
USB 2.0 ports quantity	1
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Mopria Print Service
Duplex media weight	60 - 90 g/m²
Paper tray media types	Plain paper
Paper tray media weight	60 - 163 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	751 sheets
Auto document feeder (ADF) input capacity	1 sheets
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Server operating systems supported	Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (printing)	1300 W
Energy Star Typical Electricity Consumption (TEC)	0.3 kWh/week
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	65000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c, PCL 6, PostScript 3
Product color	Black, White
Market positioning	Home & office
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	450 mm
Width	400 mm
Height	334 mm
Weight	25000 g