2.Preventive Maintenance
12
2. Preventive Maintenance
Maintenance Table
Symbol keys: C: Clean, R: Replace
(R): Yield Parts
The parts mentioned in these tables have a target yield. However, the total copy/print volume made by
the machine will not reach the target yield within the machine's targeted lifetime if the machine is used
under the target usage conditions (ACV, color ratio, and P/J). So, these parts are categorized not as PM
parts but as yield parts (EM parts). The parts with "(R)" in this table are yield parts.
Main machine
Slide the TM/P sensor lever for cleaning.
Wipe with a soft damp cloth.
Wipe with a soft damp cloth.
Wipe with a soft damp cloth.
ADF/Scanner (MF Model Only)
The count for the following items is based on the number of originals fed:
Wipe with a soft damp cloth, and then wipe with a dry cloth.
Wipe with a soft damp cloth, and then wipe with a dry cloth.
Condition: Image coverage ratio: 5%, BW:FC=5:5
Only for P C301W, M 250FW
Only for P C301W, M 250FW