2. Getting Started
This chapter describes preparations for using the machine, operating instructions, and character input
methods.
Overview of This Machine
Names of Major Features
In this manual, major features of the machine are referred to as follows:
• Auto Document Feeder ADF
• Multi Bypass Tray BY5010 Multi bypass tray (Tray A)
• Wide Large Capacity Tray Wide LCT (in this manual, "wide LCT" refers to the three-tray wide
LCT and the two-tray wide LCT)
• LCIT RT5090 Three-tray wide Large Capacity Tray (Three-tray wide LCT)
• Vacuum Feed LCIT RT5100 Two-tray wide Large Capacity Tray (Two-tray wide LCT)
• Multi-Folding Unit FD5020 Multi-folding unit
• Decurl Unit DU5040 Decurl unit
• Buffer Pass Unit Type S3 Buffer pass unit
• Ring Binder RB5020 Ring binder
• High Capacity Stacker SK5030 High capacity stacker
• Trimmer Unit TR5040 Trimmer
• Cover Interposer Tray CI5030 Interposer
• Perfect Binder GB5010 Perfect binder
• Tab Sheet Holder Type 3260 Tab sheet holder
Model-Specific Information
This section explains how you can identify the region your machine belongs to.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
13
To Next Page
Loading...
Need help?
General
