Where to Put Your Machine
This section describes precautions for installation and movement.
Moving the Machine
This section describes precautions when moving the machine.
Choose your machine's location carefully.
Environmental conditions greatly affect its performance.
• Contact your service representative if you need to lift the machine (such as when relocating it to
another floor). Do not attempt to lift the machine without the assistance of your service
representative. The machine will be damaged if it topples or is dropped, resulting in
malfunction and risk of injury to users. The machine's various handling areas are for service
engineer use only. Do not touch these areas.
• Contact your sales representative before moving the machine out of the building or to another
location in the building. A moving service can be provided for a fee.
Optimum Environmental Conditions After Moving the Machine
Optimum environmental conditions
• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy
disconnection of the power cord in the event of an emergency.
• Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might
occur.
• Do not place the machine on an unstable or tilted surface. If it topples over, an injury might
occur.
• After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might
move or come down to cause an injury.
Where to Put Your Machine
167
To Next Page
Loading...
Need help?
General
