Ricoh Pro C7100 User Manual

Logging In Using the Control Panel
This section explains the procedure for logging in to the machine when Basic Authentication, Windows
Authentication, or LDAP Authentication is set.
1. Press [Login].
2. Enter a Login User Name, and then press [OK].
3. Enter a Login Password, and then press [OK].
When the user is authenticated, the screen for the function you are using appears.
• If authentication fails, the "Authentication has failed." message appears. Check that the Login User
Name and Login Password are correct.
• When User Code Authentication is active, a different screen appears. See page 46 "User Code
Authentication Using the Control Panel".
Logging Out Using the Control Panel
This section explains the procedure for logging out the machine when Basic Authentication, Windows
Authentication, or LDAP Authentication is set.
• To prevent use of the machine by unauthorized persons, always log out when you have finished
using the machine.
Logging In the Machine
47

Ricoh Pro C7100 Specifications

General

Brand	Ricoh
Model	Pro C7100
Category	Printer
Language	English