• If tray 2 is installed, you can select which tray to feed paper from in [Select Paper Tray] under fax
feature settings. If you set the machine to switch between Tray 1 and 2 automatically in this setting,
you can also specify the tray the machine uses first in [Paper Tray Priority] under [Paper Settings].
For details about [Select Paper Tray], see page 247 "Fax Features Settings (When Using the
Touch Panel Model)" and [Paper Tray Priority], see page 266 "Paper Settings (When Using the
Touch Panel Model)".
• If the Fax Received indicator is lit, there is a received fax in the machine's memory that could not be
printed out due to machine errors such as an empty paper tray or a paper jam. The printing will
start as soon as the problem is resolved.
Receiving or Rejecting Faxes from Special Senders
You can set the machine to receive (or reject) faxes only from the registered Special Senders. This helps
you screen out unwanted documents, such as junk faxes, and prevents the wasting of fax paper.
To use this function, you must first register Special Senders using Web Image Monitor, and then select
whether to accept or reject faxes from them.
Registering Special Senders
This section explains how to register special senders.
Up to 30 special senders can be registered.
1. Start the web browser, and access the machine by entering its IP address.
2. Click [Special Sender].
3. From the [Destination Type] list, select [Special Sender].
Receiving a Fax
231
To Next Page
Loading...
Need help?
General
Weight and Dimensions
