Interface Tab
Interface
Item Description
Fixed USB Port • When Using the Touch Panel Model
Specifies whether the same printer/LAN-Fax driver can be used for
multiple machines or not under USB connection.
If this setting is enabled, the same printer/LAN-Fax driver you have
installed in your computer can be used with any machine other than
the one originally used for installation, if the machine is of the same
model.
If disabled, you must install the printer/LAN-Fax driver separately for
individual machines, because the machine other than the original will
be recognized as a new device upon USB connection.
• When Using the Four-line LCD Panel Model
Specifies whether the same printer driver can be used for multiple
machines or not under USB connection.
If this setting is enabled, the same printer driver you have installed in
your computer can be used with any machine other than the one
originally used for installation, if the machine is of the same model.
If disabled, you must install the printer driver separately for individual
machines, because the machine other than the original will be
recognized as a new device upon USB connection.
NFC Specifies whether or not to synchronize the data you have configured using
the control panel and Web Image Monitor with the data stored in NFC.
You can read and write the data in NFC by using the application
corresponding to the machine.
Locked Print Timeout
(seconds)
Specifies how many seconds the machine holds a new Locked Print file,
when the machine cannot store any more Locked Print files (0 to 300
seconds). Within this time, you can print or delete the new Locked Print file.
You can also print or delete an existing Locked Print file so that the new
Locked Print file can be stored in the machine.
8. Configuring the Machine Using Utilities
342
To Next Page
Loading...
Need help?
General
Weight and Dimensions
