Risco RisControl User Manual

21
Step 7 – Entering Panel’s Password
Enter the panel’s RISCO Cloud password and then enter it again to confirm. This
ends the setup procedure for the Master Smart Home Gateway.
Note: The Panel Password screen below will appear only if the panel is not already
in the site.
Figure 14: Entering Panel Password Screen
Note: The panel’s password is used by the RISCO Cloud for validating its
communication with the security system in the site and is required in order to add
the panel to the selected or created site. The default password for the new panel is
“AAAAA”.

Risco RisControl Specifications

General

Brand	Risco
Model	RisControl
Category	Control Panel
Language	English