Risco RisControl User Manual

84
Siren Test
1. Click the “CHECK” button to enter the “Siren Test”.
Figure 86: Siren Test Screen
2. Click the “Siren Test” or the “Strobe Test” button to perform the test.
Service Mode
Activating “Service” mode silences all tamper alarms from detectors and
accessories for an installer-defined time period. During this time, you can replace
wireless detector and accessory batteries without tamper alarms sounding.
1. Click the “ACTIVATE” button to activate “Service Mode”.
2. Replace the device batteries, as required.
Restart Keypad
Click the “RESTART” button to restart the RisControl Keypad.
Upload Logs File
You can upload log files to a predefined storage location, where access to these
files will be given to RISCO support.
1. Click the “Upload Logs File” button; the file name will be displayed on the next
screen that opens.

Risco RisControl Specifications

General

Brand	Risco
Model	RisControl
Category	Control Panel
Language	English