Specifications and Site Requirements
Mechanical Specifications
QuickStick HT User Manual 127
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
QSMC Motor Controller
The QSMC motor controller is the external motor drive for the 1 m QSHT motors and the
1/2 m QSHT double-wide motors. One controller is required for each motor.
Figure 4-4: QSMC Motor Controller Mechanical Drawing
NOTE: Each vent must be clear for unobstructed airflow.
Mounting kit available for standard 19 in electronics rack.
Ingress Protection Rating: IP20.
See QSMC Motor Controller on page 142 for the electrical specifications.
Contact ICT Customer Support for current detail drawings.
Exposed Materials
The motor controller provides openings for airflow and must not be installed where harsh con-
ditions exist.
All Dimensions in Millimeters [Inches]Weight: 3.6 kg [7.9 lb]
KEEP AREA FREE
FOR AIRFLOW
KEEP AREA FREE
FOR AIRFLOW
AIR FLOW
AIR FLOW
CABLE / CONNECTOR
EXCLUSION AREA
M6 GND STUD
CUSTOMER SERVICEABLE
FAN FILTER MEDIA
[6.0]
152
[3.44]
87.3
[9.98]
253.5
[10.3]
261
[13.87]
352.3
[12.99]
330.0
[0.65]
16.5
To Next Page
Loading...
Need help?
General
