Safety Guidelines
Regulatory Compliance
42 MagneMotion
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Equipment Regulatory Guidelines
The following regulatory guidelines are provided to aid in the use and service of the QSHT
components in a transport system.
• ICT Customer Support issues Technical Advisories to notify the owners of record of
any field retrofits.
• Contact ICT Customer Support for information regarding repair and maintenance ser-
vice policies, both during the production of the QSHT components and after produc-
tion is discontinued.
• Any user-caused damage during integration of the QuickStick HT components into
their equipment is the responsibility of the user.
• Responsibility for work that MagneMotion authorized technicians performs or for
equipment that the owner of record transports or resells, is determined on a
case-by-case basis by ICT Customer Support.
• Any parts being returned to MagneMotion must be packaged according to the instruc-
tions provided in the Packing Procedure on page 311.
• MagneMotion provides training for the QuickStick HT components as integrated into
a transport system. Any personnel that are performing service procedures on the
QSHT components must be properly qualified and trained. Damage that results from
improperly performing a procedure or not following cautions is not covered under
warranty or service agreements.
To Next Page
Loading...
Need help?
General
