Appendix
Data for Transport System Design Calculations
318 MagneMotion
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Thrust Force Data
The data that is provided in Table A-2 shows the available thrust for QSHT motors at
10.9 Amps stator current using a high flux magnet array. This data is graphed in Figure A-2,
which shows how the available thrust increases with an increase in the number of magnet
array cycles. The chart also shows that as the Vehicle Gap increases, the available thrust
decreases.
Table A-2: Thrust Force Data, High Flux Magnet Array
Maximum Thrust (N) at 10.9 Amps Stator Current
Length Vehicle Gap (mm)
Cycles mm 4 7 10 13 16 19 22
2 238 571 483 408 345 292 246 208
3 358 856 724 612 517 437 370 313
4 478 1142 965 816 690 583 493 417
5 598 1427 1207 1020 862 729 616 521
6 718 1713 1448 1224 1035 875 739 625
7 838 1998 1689 1428 1207 1021 863 729
8 958 2284 1931 1632 1380 1166 986 833
To Next Page
Loading...
Need help?
General
