Specifications and Site Requirements
Electrical Specifications
QuickStick HT User Manual 135
Rockwell Automation Publication MMI-UM007F-EN-P - September 2020
Motor/QSMC Power Cable
The QSMC motor controllers are supplied with appropriate motor (stator) drive cables, which
provide power to the phases of the motor. These cables are available in lengths from 2 m to
20 m. Contact MagneMotion for replacement cables. The motor drive cable connects directly
to the QSMC motor controller and to the related motor.
Figure 4-10: 1 m QSMC to Stator Drive Cable
Table 4-5: 1 m QSMC to Stator Drive Cable Pinouts
Wire
Gauge
Motor Controller
3-Pt Reverse Bayonet,
16S-1, Male
Motor
3-Pt Reverse Bayonet,
16S-1, Female
Stator Block 1, Phase A 16 AWG A A
Stator Block 1, Phase B 16 AWG B B
Stator Block 1, Phase C 16 AWG C C
Stator Block 2, Phase A 16 AWG D D
Stator Block 2, Phase B 16 AWG E E
Stator Block 2, Phase C 16 AWG F F
GND 16 AWG G G
NOTICE Modifications to the MMI motor to motor controller cables,
or using custom cables, violates the UL conditions of accept-
ability.
Motor
Motor Controller
700-1537-xx
To Next Page
Loading...
Need help?
General
