Rockwell Automation PowerFlex 7000 User Manual

Rockwell Automation Publication 7000-UM202H-EN-P - November 2023 191
Appendix B PowerFlex 7000 Drive Spare Part Storage Requirements and Recommendations
SGCT – SPS Board
1. Connect the variable AC power source 120V or 240V to the test plug of the
SPS board.
2. Connect the SPS DC output terminals with the DC input terminals of
SGCT.
3. Connect the AC power source to the SPS board using the SPS wire
harness.
4. Use 16 AWG/1.3 mm
2
to connect the SPS with SGCT board.
Figure 151 - SGCT - SPS Board
SPS Board
1. Connect the AC source 120V or 240V to the test plug of SPS board.
2. Use SPS wire harness provided with the drive to connect the SPS with AC
source.
Figure 152 - SPS Board
DC Input Terminals
New Style Drawing
Old Style Drawing
AC Input Terminals
New Style Drawing
Old Style Drawing

Rockwell Automation PowerFlex 7000 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 7000
Category	DC Drives
Language	English