216
Playing Back a Song
This operation will save the selected phrase to the project.
A phrase you recorded or edited is temporary, and will be lost when
you turn off the power. If you want to keep the phrase, you must
save it.
1.
Press [SONG].
2.
Press [F3 (Phrase List)].
The MIDI Phrase List screen will appear.
Phrases without the symbol and phrases with the
symbol have not been saved.
3.
Turn the VALUE dial or use [INC] [DEC] or
/ to
select the phrase that you want to save.
4.
Press [F2 (Save)].
5.
Assign a name to the phrase.
For details on assigning a name, refer to
“Assigning a Name”
(p. 42).
6.
When you’ve finished assigning a name, press [F8 (OK)].
A message will ask you to confirm the Write operation.
Never turn off the power while writing is in progress.
7.
Press [F7 (OK)] to execute.
If you decide to cancel, press [F8 (EXIT)].
* You can’t save a phrase by overwriting an existing phrase.
This operation will save all phrases of the phrase list into the project.
1.
Press [SONG].
2.
Press [F3 (Phrase List)].
The MIDI Phrase List screen will appear.
Phrases without the symbol and phrases with the
symbol have not been saved.
3.
Press [F3 (Util Menu)].
The Phrase Utility Menu window will appear.
4.
Press
/ to choose “Save All,” and then press [F8
(Select)].
To cancel, press [F7 (Cancel)].
A confirmation message will appear.
5.
Press [F7 (OK)] to execute.
If you decide to cancel, press [F8 (EXIT)].
When you execute Save All, the phrases will be written into the
same numbers of the phrase list. Phrase names will be assigned
automatically.
Saving a Phrase (Save)
Saving all Phrases (Save All)
Fantom-G_r_e.book 216 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Loading...
Need help?
General
