Roland Fantom G8 User Manual

239
Editing Songs
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
Here’s how to erase the currently-edited phrase. This operation will
not delete the phrase file that’s saved in the project.
1. Access the Phrase Edit screen (p. 238).
2. Press [F1 (Clear)].
A confirmation message will appear.
3. Press [F7 (OK)] to execute.
If you decide to cancel, press [F8 (EXIT)].
This operation will save the phrase to the project.
A phrase you recorded or edited is temporary, and will be lost when
you turn off the power. If you want to keep the phrase, you must
save it.
1. Access the Phrase Edit screen (p. 238).
2. Press [F2 (Save)].
3. Assign a name to the phrase.
For details on assigning a name, refer to “Assigning a Name”
(p. 42).
4. When you’ve finished assigning a name, press [F8 (OK)].
A screen will appear where you can select the writing-
destination phrase.
5. Turn the VALUE dial or use [INC] [DEC] to select the phrase
number.
6. Press [F8 (Write)].
A message will ask you to confirm the Write operation.
Never turn off the power while writing is in progress.
7. Press [F7 (OK)] to execute.
If you decide to cancel, press [F8 (EXIT)].
Here’s how to specify the time signature of a phrase.
1. Access the Phrase Edit screen (p. 238).
2. Press [F6 (Phrase Beat)].
3. Use the cursor buttons and the Value dial to specify the
time signature of the phrase.
4. Press [F8 (Close)].
1. Access the Phrase Edit screen (p. 238).
2. Press [F3 (Modify)].
The Phrase Modify Menu window will appear.
fig.19-008_50
3. Use
/ to choose the desired function, and then
press [F8 (Select)].
Quantize → p. 240
Erase → p. 242
Delete → p. 243
Copy → p. 243
Insert → p. 244
Transpose → p. 244
Change Velocity → p. 245
Change Channel → p. 246
Change Duration → p. 247
Shift Clock → p. 248
Data Thin → p. 249
Truncate → p. 249
When the phrase modify menu is displayed, you can press a
dynamic pad to jump to the respective modify screen.
For details on the edit window for each phrase modify function,
refer to the corresponding explanation.
4. Set the parameters of the edit function you chose. Use
[CURSOR] to move the cursor to the desired parameter, and
turn the VALUE dial or use [INC] [DEC] to make settings.
Verify that you’ve selected the object you intended to edit,
and make changes if necessary.
5. Press [F8 (Execute)] to execute.
When the operation is completed, the display will briefly
indicate “Completed !”.
If you decide to cancel, press [F7 (Cancel)].
You can Undo the result of editing (p. 217).
Erasing the Currently-edited Phrase
(Clear)
Saving a Phrase (Save)
Specifying the Time Signature of a
Phrase (Phrase Beat)
Phrase Modify Menu
Fantom-G_r_e.book 239 ページ ２００９年７月２日 木曜日 午後２時５５分

Roland Fantom G8 Specifications

General

Brand	Roland
Model	Fantom G8
Category	Electronic Keyboard
Language	English