Roland Fantom G8 User Manual

87
Creating a Patch
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
“Initialize” means to return the settings of the currently selected
sound to a standard set of values.
Patch Initialize will initialize the settings of the currently selected
patch.
Tone Initialize will initialize the settings of the currently selected
tone.
The Initialize operation will affect only the currently selected
sound; the sounds that are stored in user memory will not be
affected. If you wish to restore all of the Fantom-G’s settings to
their factory values, perform a Factory Reset (p. 284).
1. Select the patch that you want to initialize (p. 47).
2. Press [PATCH].
3. Press [F4 (Util Menu)].
The Patch Utility Menu window appears.
4. Press
or to choose what you want to initialize
(Patch Initialize or Tone Initialize), and then press [F8
(Select)].
If you decide to cancel the operation, press [F7 (Cancel)].
A message will ask you for confirmation.
5. Press [F7 (OK)] to execute.
To cancel, press [F8 (EXIT)].
This operation copies the settings of any desired patch to the
currently selected patch. You can use this feature to make the editing
process faster and easier.
1. Select that you want to edit and the copy-destination patch
(p. 47).
2. Press [PATCH].
3. Press [F4 (Util Menu)].
The Patch Utility Menu window appears.
4. Press
or to choose “Patch Tone Copy,” and then
press [F8 (Select)].
If you decide to cancel the operation, press [F7 (Cancel)].
The Patch Tone Copy window appears.
5. Press [CURSOR] to move the cursor, select the “Source
(copy-source)” bank and number, and patch tone.
6. Turn the VALUE dial or use [INC] [DEC] to make settings.
7. Press [CURSOR] to move the cursor, select the
“Destination (copy-destination)” patch tone number.
8. Turn the VALUE dial or use [INC] [DEC] to make settings.
9. Press [F8 (Execute)].
A message will ask you for confirmation.
10. Press [F7 (OK)] to return to execute.
To cancel, press [F8 (EXIT)].
Initializing Patch/Tone Settings
(Patch Initialize/Tone Initialize)
Copying Patch (Tone) Settings
(Patch Tone Copy)
The Compare Function
For the Patch Tone Copy operations, you can use the Compare
function.
The Compare function allows you to hear the copy-source patch
in order to verify it.
If you want to play the copy-source patch, press [F6 (Compare)].
The patch auditioned using the Compare function may
sound slightly different than when it is played normally.
Fantom-G_r_e.book 87 ページ ２００９年７月２日 木曜日 午後２時５５分

Roland Fantom G8 Specifications

General

Brand	Roland
Model	Fantom G8
Category	Electronic Keyboard
Language	English