Roland Fantom G8 User Manual

243
Editing Songs
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
This function deletes a specified area of sequencer data, and moves
the subsequent data to fill the gap. As a result, the measure length
will be shortened by the number of deleted measures.
For details on the settings, refer to “Phrase Modify Menu” (p.
239).
Measure, For (Edit Range)
Specifies the range of measures that are to be deleted. If you set
“For” to “ALL,” all measures will be specified.
This function copies a specified area of sequencer data.
For details on the settings, refer to “Phrase Modify Menu” (p.
239).
Part Group
Specifies the Part Group.
Ch (MIDI Channel)
Selects the MIDI channel of the data to be copied.
When you want to copy all the sequencer data, set this parameter to
“ALL.” To copy only the sequencer data of a specific MIDI channel,
select the MIDI channel.
Value: ALL, Ch1–Ch16
Src Measure, For (Edit Range)
Specifies the range of copy-source measures. If you set “For” to
“ALL,” all measures will be specified.
Dst Measure (Destination Measure)
Specifies the copy-destination measure.
If you want the copy destination to be right after the last measure of
a phrase, set this parameter to “END.”
Copy Mode
Specifies whether you want to preserve the existing data in the copy
destination when copying.
Value
MIX: Combines the data from the copy source with the
existing data in the copy destination.
REPLACE: Musical data in the copy destination will be erased
(i.e., overwritten) when the copy takes place. Only
the sequencer data of the MIDI channels specified by
the Channel parameter will be overwritten, and data
of other MIDI channels will remain.
Copy Times
Specifies the number of times that the data will be copied to the copy
destination.
Status
Selects the type of data to be copied.
Value
ALL
NOTE
Poly Aftertouch
Control Change
Program Change
Channel Aftertouch
Pitch Bend
System Exclusive
Tune Request
Range Min, Range Max
If you have selected “NOTE,” “P.AFT,” “C.C,” or “PROG” for the
Status parameter, specify the range. Set “Range Min” to the lowest
value of the range, and “Range Max” to the highest value of the
range.
To copy all notes or polyphonic aftertouch data, set “Range
Min” to “C-1” and “Range Max” to“G9.” To copy C4, set
“Range Min” and “Range Max” to “C4.” To copy C3 through
C4, set “Range Min” to “C3” and “Range Max” to “C4.”
• To copy all controller numbers, set “Range Min” to “0” and
“Range Max” to “127.” To copy all program numbers, set
“Range Min” to “1” and “Range Max” to “128.” To copy
number 4, set “Range Min” and “Range Max” to “4.” To copy
numbers 3 through 14, set “Range Min” to “3” and “Range
Max” to “14.”
Deleting Unwanted Measures
(Delete)
Copying Phrases (Copy)
Value Explanation
Internal Internal (internal sound generator)
EXP1 Expansion board 1
EXP2 Expansion board 2
External External MIDI output
ALL All part group
Fantom-G_r_e.book 243 ページ ２００９年７月２日 木曜日 午後２時５５分

Roland Fantom G8 Specifications

General

Brand	Roland
Model	Fantom G8
Category	Electronic Keyboard
Language	English