271
Editing a Sample
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
This operation stretches or shrinks the sample to modify the length
or tempo. You can stretch or shrink the sample by a factor of one half
to double the original length.
1.
Press [SAMPLE] to access the Sample Edit screen.
2.
Press [F3 (Modify)].
The Sample Modify Menu window will appear.
3.
Press
or to select “Time Stretch,” and then press
[F8 (Select)].
To cancel, press [F7 (Cancel)].
4.
Press
or to select the parameter.
• Edit Time Stretch
VALUE
BPM:
Changes the BPM of the sample to the BPM you
specifies.
Time:
Specifies the length of the sample as a time value.
Rate:
Specifies the length relative to the current length of
the sample.
Value:
50.0–200.0%
•
Type
Lower settings of this value will make the sound more suitable
for faster phrases, and higher settings will make the sound
more suitable for slower phrases.
Value:
TYPE01–TYPE10
•
Quality Adjust
Make fine adjustments to the tonal quality of the Time Stretch.
Value:
1–10
5.
Use VALUE dial or [INC] [DEC] to specify the tempo/length.
When setting the BPM (tempo) value, you can hold down
[SHIFT] and turn the VALUE dial, or use [INC] [DEC] to adjust
the value to the right of the decimal point.
6.
Press [F8 (Execute)].
A message will ask you for confirmation.
7.
Press [F7 (OK)] to execute.
To cancel, press [F8 (EXIT)].
Stretching or Shrinking a
Sample (Time Stretch)
Fantom-G_r_e.book 271 ページ ２００９年７月２日 木曜日 午後２時５５分
To Next Page
Need help?
General
